Pvc coated aluminum coil stock in Pakistan

Pvc coated aluminum coil stock in Pakistan used in the construction include single-layer aluminum plates, composite aluminum plates and other materials. Generally, they are usually referred to as single-layer aluminum plates (also called single aluminum plates or pure aluminum plates), which are mostly used in architectural decoration projects. aluminum checker plate In recent years, single-layer aluminum plates are used in aluminum plate curtain walls. More common. Pvc coated aluminum coil stock in Pakistan is also a form of curtain wall. Simply speaking, the aluminum panel is used instead of the glass to make the curtain wall.

pvc coated aluminum coil stock in Pakistan

The aluminum curtain wall is mostly used for wall covering and non-lighting walls. For example, the Guangzhou World Trade Center used the southwest aluminum processing plant sheet factory to process nearly 150 tons of Pvc coated aluminum coil stock in Pakistan with different curvatures, and the surface was electrostatically sprayed. Foreign aluminum panel curtain walls have always used single-layer aluminum panels. Single-layer aluminum sheets are generally made of pure aluminum sheets. The thickness of the aluminum plate is 3mm. In order to strengthen the strength of the aluminum plate, the ribs must be installed on the back of the aluminum plate (the existing manufacturer is uneasy). The ribs are made of thick Pvc coated aluminum coil stock in Pakistan. First, use a flash welder to put a screw cap. Welded on the back of the aluminum plate and then drilled the aluminum strips made of ribs into the screws and fixed them with screws. In order to reduce the weight of aluminum plates and increase the strength of aluminum plates, we use aluminum alloy plates, which are often made of Pvc coated aluminum coil stock in Pakistan pressed by No. 21 rust-proof aluminum code LF21. The thickness of the aluminum plate is reduced from the original 3mm to 2.5mm, and the strength of the alloy is about twice as high as that of the pure aluminum plate. The ribs are made of LF21 aluminum strip. The width of the strip is determined according to the surface of the aluminum sheet.

Send a Inquiry

Your email address will not be published. Required fields are marked *